I came up with a plan onmeasuring the fuel consumption with the new ignition
using the RX8. The idea is to take the ignition trigger out
of the RX8 computer and transform it to fire the plugs six times
instead of only once. Then replacing the Kettering smart coils
with four of my ignitions.
This is a daunting chore if done over a wide range of RPM's but
rather simple if only one RPM is involved.
4000 RPM in top gear is 80 MPH so I chose that RPM.
This will use the recorded OBD II combustion air flow data
to calculatethe fuel burn with one spark and six sparks.
See the attached OBD data jpg.
The idea is to use 4 double pole double throw relays to select
one spark or six sparks while the engine is running.
This way the engine can be started on one spark and
accelerated up to 4000 RPM and 80 MPH on a flatroad.
Then six sparks are selected with the relays and data is recorded.
Back to back tests under the same atmospheric conditions,
the same RPM and the same engine load can be made every
few minutes to detect small changes in fuel consumption.
The attached schematic is for one ignition and one plug.
This will be reproduced for 4 spark plugs.
Please upload your comments and any better ideas.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.