Paul,  does anyone have an accurate measurement from the flex plate ( I think the flexplate is approx 2mm thick)  to level with the back of the E shaft where the pilot bearing is installed.

  Neil.


This is an RX8 engine but as far as I know this part of the e-shaft is the same as a 13B
Sorry it is in inches.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
  ACRE NL web site. http://www.rotaryeng.net
  You Tube http://tinyurl.com/beqqxas
  Copyright 1998-2014 All world wide rights reserved.