I've always been fascinated with the Wankel concept but haven't had
time to pursue it - Recently sort-of-retired and have a pretty
complete CNC machine shop - Want to get started hands on learning
and wonder if the complete Wankel engines offered at $2,000 to $3,000
on eBay by texasjdmcorp (seller id) would be a good place to start
the process - Eventually would like to build for small homebuilt
aircraft application - 75 to 125 hp with gear or belt reduction of my
own design - Background -- Precision Machinist, Tool and Die Maker
and Mechanical/Aeronautical engineer -
Suggestions, comments and other approaches to consider are welcome
Roland Friestad
cardinal.eng@grics.net
Just the man I want to hear from. I need NC machined parts from time
to time for my new rotary ignition. I'll email an IGES in a day or
two for a quote. The parts are very simple for the most part.
Where are you Roland?
We are also in dire need of a gear box maker. The Ford planetary has
been working great since 1973 but our most recent supplier retired.
Paul Lamar
No comments on my idea about the Wankels offered on eBay by -
texasjdmcorp
??
Roland Friestad
Looks better than your average junk yard.
Putting "texasjdmcorp" in the ebay search engine did not bring up
any examples of Mazda rotary engines. I need more info or an item
number.
Putting "Mazda rotary engines on ebay" in google a 3 rotor showed up
on ebay for $4000 from
<http://www.ebay.com/usr/japan_star_motor?_trksid=p2047675.l2559>japan_star_motor
<http://www.ebay.com/usr/japan_star_motor?_trksid=p2047675.l2559>.
If in good shape that would be a steal as they normally go for as much
as $8000.
Lots of other Mazda rotary engines on ebay.
Here is another that looks like a bargain. Great pusher turbo engine.
The years don't
match the picture. The Turbo II was not built till 89 as I recall.
http://www.ebay.com/itm/Mazda-RX7-JDM-13B-Turbo-2-S4-Engine-13BT-Motor-13B-T-Long-Block-86-87-88-Series-/351133534720?pt=Motors_Car_Truck_Parts_Accessories&hash=item51c1308a00&vxp=mtr
I have never bought one from ebay so I cannot vouch for anything.
Maybe you should buy the cheapest one you can find and take it
apart to become familiar with it. If you can wait till Sun n Fun there
is always several in the engine work shop tent. In various stages of
disassembly.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.