I've always been fascinated with the Wankel concept but haven't had time
to pursue it - Recently sort-of-retired and have a pretty complete CNC
machine shop - Want to get started hands on learning and wonder if the
complete Wankel engines offered at $2,000 to
$3,000 on eBay by texasjdmcorp (seller id) would be a good place to
start the process - Eventually would like to build for small homebuilt
aircraft application - 75 to 125 hp with gear or belt reduction of my
own design - Background -- Precision Machinist, Tool and Die Maker and
Mechanical/Aeronautical engineer -
Suggestions, comments and other approaches to consider are welcome
Roland Friestad
cardinal.eng@grics.net
Just the man I want to hear from. I need NC machined parts from time to
time for my new rotary ignition. I'll email an IGES in a day or two for
a quote. The parts are very simple for the most part.
Where are you Roland?
We are also in dire need of a gear box maker. The Ford planetary has
been working great since 1973 but our most recent supplier retired.
Paul Lamar
No comments on my idea about the Wankels offered on eBay by -
texasjdmcorp ??
Roland Friestad
cardinal.eng@grics.net
Looks better than your average junk yard.
Putting "texasjdmcorp" in the ebay search engine did not bring up any
examples of Mazda rotary engines. I need more info or an item number.
Putting "Mazda rotary engines on ebay" in google a 3 rotor showed up on
ebay for $4000 from
<
http://www.ebay.com/usr/japan_star_motor?_trksid=p2047675.l2559japan_star_motor
<
http://www.ebay.com/usr/japan_star_motor?_trksid=p2047675.l2559.
If in good shape that would be a steal as they normally go for as much
as $8000.
Lots of other Mazda rotary engines on ebay.
Here is another that looks like a bargain. Great pusher turbo engine.
The years don't match the picture. The Turbo II was not built till 89 as
I recall.
http://www.ebay.com/itm/Mazda-RX7-JDM-13B-Turbo-2-S4-Engine-13BT-Motor-13B-T-Long-Block-86-87-88-Series-/351133534720?pt=Motors_Car_Truck_Parts_Accessories&hash=item51c1308a00&vxp=mtr
I have never bought one from ebay so I cannot vouch for anything.
Maybe you should buy the cheapest one you can find and take it apart to
become familiar with it. If you can wait till Sun n Fun there is always
several in the engine work shop tent. In various stages of disassembly.
Paul Lamar
Paul,
Thanks for the comments - See link below for the engines on eBay I was
asking about -
Search ebay for - jdm mazda rotary engine
results link
http://www.ebay.com/sch/i.html?_odkw=jdm+mazda+rotary&_osacat=0&_from=R40&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xjdm+mazda+rotary+engine&_nkw=jdm+mazda+rotary+engine&_sacat=0
Regarding building gear boxes etc. - Just got my 3 phase power up and
running - I saved several machines from the toolroom of my shop when I
closed it up a few years ago - Also have a couple of MAZAK machining
centers that I couldn't bear to sell - Fortunately have a friend who is
keeping them in his factory until I can get them up and running again in
exchange for some engineering consulting and CNC design work - Designed
and built nearly 400 CNC systems over the years - Built a 36x48 garage
at home, (zoning and wife wouldn't let me go bigger), two stories, and
am anxious to get back to getting metal slivers in my fingers again -
Would consider building gear boxes but not interested too much in
holding a tight schedule - Did that for nearly 40 years and now mostly
plan on doing it for fun -
Roland Friestad
That's a whole bunch. Pick one and I will comment on it.
Here are some suggestions for gear boxes.
The old Ross with needle bearings was ten pounds lighter than Tracy
Crook's later design. The Ross was built between 1973 and about 2000 or
so. Hundreds were sold. I think Tracy sold at least
100 over the past 14 years or so. In the meantime Ford kept beefing up
the planetary trannie it was based on and the latest versions are used
in the 650 ft pound Power Stroke Diesel.
These six pinion gear sets are less than $200.
Paul Lamar
Roland, come on in its fun. Just built 50 x 120 foot hangar down in Texas.
Just have a vertical mil and big lath.
Milo
The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas Copyright
1998-2014 All world wide rights reserved.