Subject: PSRU adapter plates and front motor mounts
From: rotaryeng
Date: 8/23/2014, 10:39 AM
To: AA-1-Me <rotaryeng@earthlink.net>, jeff doddridge <4starr@cox.net>


The name Roland Friestad, that name sounds familiar. I have it ! Are
you the same fellow that used to post about introductory CNC
conversions on hobby mills in the magazine, Home Shop Machinist ! If
you are, then I don,t have Alzheimer's  yet !

Steve Carlisle


Yup - Same guy - Among other things working on a homebuilt Wire EDM
for publication  in Home Shop Machinist or Digital Machinist -

Roland Friestad

Should I do away with the resolvers on my old Kasuga to upgrade it
with Enhanced Machine Control open source  or is there a bit of
hardware out there that will convert the resolver output?

http://www.rotaryeng.net/Nc-Mill-How-To.html


Its been on the back burner for several years. The Bandit gave up a
long time ago.

Paul Lamar


Paul,

I am interested in building a reduction drive for our own Tango. I
also happen to have a CNC conversion on my chinese Bridgeport clone
mill, that we developed ourselves. I just re-wrote the software for
the mill.

Can we still get the drive plate that the re-drive bolts onto? We
(Mark and myself) are in Oceanside, we could drive up and get it from
you. How much is the price?

Zoltan Szakaly


Jeff machines them and jeff sells them.
He is in Escondido. A much shorter drive :)

jeff doddridge <4starr@cox.net>

Have you gone for a ride in Dave Leonard's Turbo II RV6 yet? :)
It is hangared in Oceanside.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.