Clip of  previous message

"Of course it  much much easier to machine with no broach or mill
required. Especially the female part. I know no way of doing a female
spline  with out a shaper or broach"

Paul Lamar

Reply
Wire EDM works great on female splines as long as they are not blind -
But then Broaches don't work on blind female splines either -
Have done it many times
Roland Friestad

Thanks. I had not thought about EDM for splines.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.