Hi Paul, do we know what the donor axle is from, to make the output
   spindle (prop hub)

   Thanks Again, Steve Carlisle

   It is not a good way to do it. Too heavy. So it does not matter. I
   don't know anyway.

   Paul Lamar


   You can use the front wheel Hub Durango Dakota part #515007 or 930361 both of them can be purchase true EBAY below$40.00
   You will need a bit of machining and also the studs location are exactly the same as Lycoming just rebore at .625"dia

http://www.ebay.com/itm/300951140398?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT <http://www.ebay.com/itm/300951140398?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT>

http://www.ebay.com/itm/New-Premium-Hub-Bearing-Assembly-Fit-Front-Drivers-Or-Passengers-Side-/350999002469?pt=Motors_Car_Truck_Parts_Accessories&hash=item51b92bbd65&vxp=mtr <http://www.ebay.com/itm/New-Premium-Hub-Bearing-Assembly-Fit-Front-Drivers-Or-Passengers-Side-/350999002469?pt=Motors_Car_Truck_Parts_Accessories&hash=item51b92bbd65&vxp=mtr>




   JEAN PRUDHOMME



Jean , Thanks for the info,

Steve Carlisle


   The Rotary Engine News Letter. Powered by Linux.
    ACRE NL web site. http://www.rotaryeng.net
    You Tube http://tinyurl.com/beqqxas
    Copyright 1998-2014 All world wide rights reserved.