Hello Neil,

See attached as requested.

Also link to YouTube video: http://youtu.be/N2P5tHB5s3s

LinkedIn icon <https://www.linkedin.com/company/maspro-engineering <https://www.linkedin.com/company/maspro-engineering>
<https://www.linkedin.com/company/maspro-engineering>>

Paul,U tube and cross section.  The input shaft shows the spline
incorrectly at the bottom.  Details,  Neil.


I don't see a thrust bearing for the helical sun gear.

Paul Lamar


Just a fun reply.

Helical gears in mesh are supposed to look per the link below.
Looking straight on, the helix angle of two mating gears are supposed to
be in opposite direction.

https://www.google.ca/search?q=helical+gears&espv=2&tbm=isch&tbo=u&source=univ&sa=X&ei=n1b-U5XqO8jIgwTBwICoCQ&ved=0CKkBEIke&biw=1097&bih=559&dpr=1.75

Rolf Pfeiffer

In the video, the prop shaft appears to be turning on a bronze bushing - any problem?

Joel


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.