To Group,
Another issue with my wiring. After installing the resisters
required for my injectors I decided to check the voltage. I
get 12.01 volts into each resister and 12.01 volts out of
each resister. This doesn’t seem right to me; I thought
a resister was supposed to reduce the voltage going
through it. FWIW the rating for the resisters I am using
( as per the instructions ), is 5 ohm-25 watt. Thanks for
any and all comments.
Frank Clementi

It only reduces the voltage if there is current through the transistor.
You will need an O scope to see the voltage drop.

Cheap O-scope can be had for computers with USB connectors.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.