Subject: Certified Engines and parts used for Amateur Aircraft in Canada!
From: rotaryeng
Date: 9/19/2014, 8:30 AM
To: AA-1-Me



Hi, I was talking with a long time aviator here in Canada and he told
me all certified aircraft engine parts used for amateur built
aircraft have to have all original tracking number obliterated before
install . WOW !

Steve Carlisle


Steve I'm not sure your getting good info? I'd have to double check
w/ the local inspector but I've not heard of having to do this (in
Canada), we certainly haven't on the a/c we're building.

Fwiw Jarrett Johnson (Also Canadian)

I fly a couple of certified experimental's with numbers. It could be
some people don't want anything traceable back to them and remove all
their numbers.

John Gibbons (opposite end of Steve's rock)

John, okay, so a certified aircraft engine, all numbers intact, could
be removed from a certified aircraft, the engine placed into a
amateur built aircraft, and run and maintained under those rules, and
then one day be installed back into a certified, with no record of
it's alternative life. Just trying to understand how the DOT can
track that use, or not !

Steve Carlisle (at the better end of the ROCK !)

No. An experimental with no numbers could never go into a certified
aircraft. If I were to put my C140 into the Owner Maintenance category, in
all practicality I could never put it back into certified service.
Apparently you can do it but from what I understand and AME would have to
sign off on each component part of the aircraft which could prove impossible
and would prove impratical. If any trace numbers were missing, that part
would need replacing. I am about to start test flying a newly built Glastar.
It has a brand new certified Lycoming in it which once the paper work is
finalised and shows that it is installed in the experimental it can not go
into a certified aircraft. IIRC the Lycoming data plate is removed to
prevent it being used as certified but the indivdual part numbers will stay
intact. That is probably what was meant by the guy you talked to.

John (at the warm,sunny, dry end of the ROCK )



Thanks John, that seems to make more sense, but if that engine was dis-assembled, the parts could end up back into certifies aircraft, right?

Steve, and yes, you do have better weather, good for old folks !


  The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2014 All world wide rights reserved.