Here it is. The down going slope on the lower trace is
the trigger for firing the smart RX8 coils. The RX8 coils
are energized by a 2 msec pulse from the stock EFI computer.
When this pulse shuts off the coils spark the plugs.
That triggers the analog tach CMOS 555 one shot circuit that
generates the control voltage for the KA331 voltage to frequency
circuit. These pulses in turn trigger the Lamar Instruments high
speed CD ignition to fire roughly every 5 degrees.
More work to do but this is the hard part.
Thanks to David Josephson for all your help.
Paul Lamar
Here is some tracking data.
RPM Trig msec OSC usec
3800...16.............16
4300...14.............13
5000...12.............10
6000...10..............8
7500....8...............6
The osc is way too high frequency. I need to slow it down.
The trigger is the lower scope and the osc is the upper scope.
I am very pleased!!! This is highly doable :) :) :)
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.