Subject: 81 to 85 distributor waste spark???
From: rotaryeng
Date: 12/5/2014, 6:21 AM
To: AA-1-Me


Anybody know for sure. ?

I think it is as there are only two coils. One for leading and one
for trailing coils.

There are four trigger tits and it rotates at half e-shaft speed.
There is a slight time delay between VR sensors.

I assume one sensor and igniter  is the trailing plugs and the
second is the leading plugs.

PaulLamar


I believe that the distributor rotor and the cap handle that with multiple
posts sending the spark to the front rotor or the rear. As I recall from
way back you can connect the lead coil to the front plug and the trailing
coil to the rear plug, start and set timing, etc.. That was how I learned
to set the points on my RX3.

Ray Hellstrom

The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.