Subject: 81 to 85 distributor waste spark???
From: rotaryeng
Date: 12/5/2014, 6:25 AM
To: AA-1-Me


Anybody know for sure. ?

I think it is as there are only two coils.
One for leading and one for trailing coils.

There are four trigger tits and it rotates at half e-shaft
speed. There is a slight time delay between VR sensors.

I assume one sensor and igniter  is the trailing plugs and the second
is the leading plugs.

Paul  Lamar


True. Only the trailing needs the distributor. The leading may be run as a lost spark system with both leadings firing at the same time.  This was done in later models.

With the distributor you can run both coils off of the leading pickup and just have no split.  Not required for racing, only for smog testing.
Without the distributor you can run one reluctor and two pickups 180 degrees apart . One pickup for the front housing and one for the rear housing.  Use double ended coils to run both leading and trailing plugs in each housing. MSD has such coils. No advance curve is possible here (or needed). Works great. Rock solid timing. Timing light looks like a flashlight shinning on the pulley.

Lynn E. Hanover



The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2014 All world wide rights reserved.