Subject: Pop rivet fix for RX8 flat tire.
From: rotaryeng
Date: 12/7/2014, 6:23 AM
To: AAA-rotaryeng


I found a self drilling sheet metal screw in the tire. Late Sat night
and no service stations open in town to fix flats.

I had some 1/8th dia. 1/2 inch long pop rivets. I coated it with RTV
and inserted into the hole and popped it in place. (I was at the
hangar).

I drove it 12 miles home and it lost no air pressure.

I'll sleep with my fingers crossed.

Paul Lamar


After getting dinged $40 bucks to fix a flat on my truck I bought a "tire plug" kit. Only works on nail holes but that is 95% of them in my experience. Says it is only a temporary fix but I've been using it for a month.

Darren Dyck

I checked the air pressure this morning and it only lost a few PSI.
If somebody wants to get rich patent and sell a kit with a special pop rivet coated
with tire cement . Will work for up to a 1/4 inch hole. Cheaper and lighter
than a spare tire.

I looked in  the trunk and opened what I thought was the tool box
that came with the 2004 RX8. Low and behold there was a high quality
12V four bar air compressor. Made in Japan by Sumitoma Rubber Industries Ltd.

I starting reading the owners manual for the first time in 10 years and it
mentioned a tire can lose one psi a month. I did not know that. Also if the
temperature changes 10 degrees F the pressure will change 1 psi.

It also came with a large container of goo to be inserted into the tire in case
of a leak. No spare tire. Max speed once you do that is 50 MPH. Also
the tire is history and must be replaced.  It is called the Mazda Instant
Mobility System. It expired in 04 2007.

The ingredients are: Propylene Glycol, Natural Rubber, Terpene Polymer
and Water. A good start for the coating on the pop rivet. It is limited
to a 3/16th hole in the treed area.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.