The article made is sound like Mistral made all the parts and nobody
   else ever put
   a Mazda 3 rotor in an airplane before :)  Perhaps Kitplanes is angling
   for a Mistral ad. Don't hold your breath Kitplanes :)

   I never saw a Mistral engine that did not have at least Mazda rotor
   housing and may be all the other Mazda end and center housing are
   on Paul Janssens's  engine. I have seen lots of Mistral engines in the
   US and all over Europe in shows.

   The rotor housing coatings are nearimpossible to coatfor that size
   engine without the Mazda steel liner. I could be proven wrong but I
   would have to see 2000 hours in aircraft service on a coated housing.

   The only part that cracked was the Mistral cast oil pan. There is zero load
   on the Mazda oil pan unless somebody forgot to install the large hollow
   dowel
   pins between all housings.

   However Kitplanes is turning into a great experimental aircraft magazine
   ten times better that that fluff job EAA Sport Aviation rag :)

   Here are some factory photos.

   Paul Lamar


   So is Mistral back in business?

   Bill Jepson

   As far as know they may still be in biz technically  but they are
   definitely inactive.


   How many people on here buy kitplanes magazine?

   Paul Lamar


   I do.

   gary lucky


   Roland Bockhorst

   subscribes too.


   The Rotary Engine News Letter. Powered by Linux.
   ACRE NL web site. http://www.rotaryeng.net
   You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2014 All world wide rights reserved.