Subject: rotary/electric hybrid
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 12/25/2014, 1:34 AM
To: rotaryeng

In reading today about an electric/recip hybrid, I came across an older
article using a rotary to drive a generator and then an electric motor. Do you know how this worked out?  I can certainly see many disadvantages
related to weight, complexity and efficiency, but does this not eliminate
the need for a PSRU and allow optimization of the rotary for efficiency and possibly come up with a very reliable unit?
http://phys.org/news/2011-06-world-aircraft-serial-hybrid-electric.html#nRlv

Everett

It won't affect the efficiency of the rotary but it may be made to
run at the most efficient RPM and power level. That will be negated
by converting the mechanical energy into electrical energy and
then back to mechanical.

Assume for the moment the efficiency of the generator and the electric motor are as much as 90%. The over all efficiency is therefore .9 times .9 or 81%.

Electric motors with 600 foot pounds of torque are not small and light.
The p-port Mazda 2 rotor puts out 200 foot pounds of torque and the 3:1 gear box converts that to 600 foot pounds of prop torque.

Therefor the 200 HP electric motor will require a gear box. The trend
is to use many small electric motors with small diameter props.

Adding all this stuff up adds a lot of weight and cost.

Paul Lamar in NYC and Merry Christmas


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.