Subject: Rotary stuff for sale in OZ
From: rotaryeng
Date: 12/29/2014, 4:11 PM
To: AAA-rotaryeng



G'day Paul, I don't know how to start a new thread, I've always been
replying to something previously. As the passage of time and
increasing decrepitude have caught up with me the time has come for
me to let most of my projects go. I can no longer fly due to leg
weakness - I can't be confident of cross wind landings. My present
ongoing project is a disability aid, a light weight folding three
wheeler, my Engineer friend Colin Smith, has been of great assistance
- thinks it should be marketed. I must admit I simply want one for
myself. I have used a TravelScoot for 5 years now, it is very good,
but not good enough. I require that it be able to handle gravel and
soft grass for "a walk in the park". With your permission I would
like to let other subscribers in Australia know what I have available
from projects I have to abandon:

12a turbo with Tracy Crook PSRU

12a turbo with modified Ross PSRU

12a turbo engine

"Pietenpol " project, intended to be a tractor Gyroplane on floats

Thanks for your help

John Evans


 Hi John!:  Interesting offer. I'd say that if your legs are so weak that
you have problems with airplane pedals, this may go beyond what can
be attributed just to aging. If I were in your situation, I'd request an
appointment with a Neurologist or an Internal Medicine specialist,
if you haven't done it yet, to have the issue assessed.
The problem with 12A is that Mazda no longer produces parts for
 it, but perhaps it could be found elsewhere.
Have a nice year 2015. Regards. Salut †
Jose Gros-Aymerich
Madrid, Spain



Mazda does not service the 12A, but there are lots around especially in Australia.
They even have 10A stuff around with some NOS rotor housings. Early 12A are
much more difficult than '74 and newer. '71-'73 had dual side seals for compression
and two distributors. Not a detriment in it self but distinguishes where parts availability
gets worse. Some companies have made 12A rotor housings by narrowing 13B
housings. I suppose warped 12A housings could be narrowed for a 10A engine
but this would be a temporary repair as they are not made of hyper-eutectic Al.
and will also warp or compress in the area from the spark plugs down 3-4 inches.

Dale Davies


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.