Hi Paul,

I'm well under way with my build zenith ch750 cruiser & I will need one of your engine mounts.

I have attached a copy of my firewall plans. There are 5 mount locations. 1 in each corner and 1 very top centre.

I plan on using an all alloy 13b. P-port engine with a 2:85 ratio.
   Lightened rotors.
   Large volume sump
   Engine mounting - plate.
   4 barrel holly
   If a turbo will be sufficient as a muffler, I would prefer this option.
   Radiators mounted at the front either side of the reduction gear box..

I don't have an engine cowling  But the UL engine cowling is 115cm from firewall to prop hole. I would like to use one of these.


Regards
Keith B. Australia.

A 500 CFM 2 barrel Holley would be a better match.


A turbo makes a good muffler.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2014 All world wide rights reserved.