I've decided to scrub the ducted fan idea and convert a GE T58 turbo
shaft engine into a direct thrust engine instead.
Consequently I'd like to sell my 20B engine, preferably as a complete
package with accessories and numerous engine instruments. Most aircraft
grade quality.
Serial number of the engine is A991. It has been completely rebuilt.
Twice in fact, the first time compression was sub par. The only parts
original are the rotors shaft and housings. All seals and bearings are
new along with a new fuel rail. There are two submersible electric fuel
pumps new RC 550 CC fuel injectors and Tracy's EC3 computer. New water
pump new oil pump new 90 psi oil pressure regulator. Two radiators two
inter coolers and two oil coolers all new. Turbo is a 76mm compressor
oil and water cooled. Stock exhaust manifold was removed and replace
with custom 321 SS professionally TIG welded. It has a cockpit
controllable waste gate and blow off valve. I'm including a few pics but
will gladly supply more from whatever angle interested parties want.
Installed weight as is would have been 500 lbs.
I had intended to boost/run it up to 450 shp at 6,500 rpm. This engine
has not been run since the rebuild. It failed to start during the first
attempts. Turns out Tracy mis programmed the EC originally. This has
been corrected but the project had already slowed to a snails pace for
other reasons since before getting it back from him. So I ended up never
trying to start it again. As far as I know it only needs a fuel source
and it should fire right up.
At the moment I'm soliciting offers as I haven't fixed a firm price yet.
If there is insufficient interest in the complete package I will sell it
piece mill at some point.
I'm going to put this on Ebay and the RX7 forum after a bit as well for
as much exposure as possible. Engine has been inside my garage from the
get go. It was imported from Japan as is after being removed from an
auto. Located north of Atlanta, GA for anyone interested in viewing it
first hand.
I’m going to look through and add up some receipts soon to give me an
idea what I’d like to try and get for it.
Jay Jacobs
Canton, GA
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.