Paul,

I am new to your news letter, I own a tailwind (w10) upon which I am thinking of installing a Mazda rotary engine.

I also own a machine shop with a new 4 axis Doosan vertical mill, and electrical discharge machines, cnc lathe, etc.

I would like to help with any production of parts for engines/airplanes/etc that comes up.

Keep Flying!

Randy OnMarkArms.com <http://onmarkarms.com/>
Cimarron Mfg.  113A Mill St.  Silver Cliff CO  81252
 " T H A T   E V E R Y   M A N   B E   A R M E D "


Your sure can Randy. Thanks for contacting us.

We need a new gear box kit here in the states. The gears themselves are off the shelf
Ford auto trannie parts that the builder can buy and install. That cuts the product
liability  exposure on your end.

Take a look at some of these Rhino's 3D"s. and tell me if any of these ideas appeal
to you. I also have a bunch of pictures and 3D's on rotary powered Tail Winds as well.


 I am also available for free Rhino help with about 12 years experience.

Same for micro-controller programming on any automation projects you may
have in mind. I have already done three. A coil winder,  a round tube tig welder
and a linear tig welder. I can also visit if you need me as I fly UAL standby nearly free.

Paul Lamar

    The Rotary Engine News Letter. Powered by Linux.
    ACRE NL web site. http://www.rotaryeng.net <http://www.rotaryeng.net/>
    You Tube http://tinyurl.com/beqqxas
    Copyright 1998-2015 All world wide rights reserved.