Subject: Fwd: Re: Cheap DRO - (Not Cheap, Inexpensive)
From: AA-rotary-engine
Date: 1/18/2015, 8:30 PM
To: AAA-rotaryengine



I got tired of using my cheap Chinese mill without a DRO. Linear
scales are $400 and up per axis. Complete DRO's run about $1000 and
up.

An Omron rotary encoder is $25 with 2000 pulses per rev. You can't
gear it to the ball screw as that has backlash. So I came up with
this scheme.

I am using a $50 Maximite to display the numbers on a PC VGA monitor.
An old  PC keyboard to zero the numbers. I have half a dozen. A
simple BASIC program will get the job done. I will upload the source
code shortly.

First step to a cheap NC mill.
-----------------------------------------------------------------------------------------------


"Wait a minute. Suppose the cable slips on the drum?" you might say
Well here is the answer for that. Use a MXL cog belt. The proper
pulley for .001" resolution is .611" pitch diameter 1/4 inch wide.
The Maximite floating point math can correct that to exactly .001"
resolution.

Utilizing the Maximite storage capabilities  on 64 Gig SD card, it
can do things no expensive DRO on the market can match. How about a
complete history of what you made, how you made it and the time and
date you made it?

-----------------------------------------------------------------------


Really cheap DRO. These 2 inch travel dial indicators are about $20 each.

Paul Lamar




You can do the same thing without all the fuss and bother of cables,
 belts, computer programs, etc. by using inexpensive digital calipers
- I published plans for that in a couple of my "Home Shop Machinist"
columns quite a few years ago -

Roland Friestad

Good idea. If you still have  those planes I can publish them again
here if you wish.

Paul Lamar


The plans are stashed away in storage with a lot of other stuff that I
didn't have room for when I closed my manufacturing business - May have been
destroyed when I had 12 inches of water in the basement -

But you should be able to get them from the Home Shop Machinist back
issues - Richard Sohn may have a copy as when I visited him he said he read
my columns -

Roland Friestad


The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.