Subject: The secret details of the Lamar suspension mounted wing.
From: AA-rotary-engine
Date: 1/18/2015, 7:39 AM
To: AAA-rotaryengine



I am in the process of updating the web site on my race car wing
manufacturing days. Just about all Formula A (AKA F5000) suspension
mounted wings were built by me. I sold them to Carl Haas and he
mounted them on new Lola race cars before he sold them to the
racers. These car weighed about 1300 pounds empty  and had a 5 Litre
V8's with up to 800 HP.

The wing skins were .016" thick 7075 T6 razor blade material :) The
corrugated wing spar and two end ribs was 5052 H32 .040" thick.

http://www.rotaryeng.net/who.html

http://www.rotaryeng.net/1970-James-Garner-F5000.mp4

Paul Lamar


Very interesting Paul, the text mentions driver control of the wing, but I can only see anything on Chris Amon's Ferrari. Your drawings do not show any means of adjusting the angle of attack.
I noticed at Indianapolis a lot of the cars in the museum used Gurney flaps on the trailing edge, I don't see them on yours.

What airfoil did you use.

John Evans


Not all were driver controlled. I probably built over 100 suspension mounted wings.
The Chaparral wing was controlled by a foot pedal and hydraulic system similar to
a clutch slave cylinder. The Amon and Craw wings were controlled by an aerodynamic
trim tab on the trailing edge. This arrangement is called an aerodynamic servo.
None of the Formula 5000 wings were driver controlled as I recall as it was outlawed.

It was necessary to pivot the wing at the quarter cord point as that is the centre of
pressure. That implies ballast in the leading edge to static balance the wing around the centre
of pressure. Otherwise severe flutter would occur or the wing would change angle of attack
while driving over a bump.

I used a VW starter solenoid located  in the leading edge with a long rod controlling
the trim tab.

All had angle attack adjustment mechanism or stops for flat and downforce positions.

If the wing fails you will leave the road instantaneously if not sooner. That happened
to me at over 100 MPH while testing one of my wings at Rattle Snake race in Midland
Texas on the 2B test mule.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.