Anyone have RSW RD2-C for sale out there? And his ECM as well ?
-Matt Boiteau
Hi Matt:
Yes, with ECM, and Paul's aluminum manifolds plus two rotary engines.
Call 805-551-0983
<tel:805-551-0983> <
tel:805-551-0983
<tel:805-551-0983> keith@castle-light.com <mailto:keith@castle-light.com>
<
mailto:keith@castle-light.com <mailto:keith@castle-light.com>
Regards, Keith Moore
Thank you every one for the quick replies. I'm looking for a mid
March start with the firewall forward, but like to plan ahead and
looking to buy now. I have the engine already taken apart and ready
to assembly once I get the rotor housings p-ported. Waiting for
reply from Jeff D to accept the work. Same with the PSRU / adapter
plate listed on the website. Anyone else looking?
The prop will be wood with carbon fiber or complete carbon fiber, so
the RD2-C version will work. I don't know too much about Tracy's ECM
and the different versions out there. I'll have GRT's EIS to monitor
the engine, so just looking for the controller. I would like to play
around with theà Maximite this summer, but would like a running ECM
first.
I have Keith's contact. If the others would like to send me an email
 with theirs. à mattboiteau_at_gmail_dot_com Or reply to the thread,
either way works for me.
- Matt Boiteau
If you can hold off I am shooting at getting a maximite demo system
ready for sun n fun. I have all the parts. The stacked fans device
will simulate the air flow for the mass air flow sensor.
Paul Lamar
Matt Boiteau
Do you have your GRT EIS yet ?
http://www.grtavionics.com/
John Gibbons
John, no I haven't bought the EIS yet. I'll be going with GRT HXr for my
glass setup.
- Matt
The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.