Subject: Fwd: Re: Wanted to buy RealWorldSolution's PSRU
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 1/21/2015, 12:34 PM
To: AA-1-Me


Anyone have RSW RD2-C for sale out there? And his ECM as well ?

-Matt Boiteau



Hi Matt:

Yes, with ECM, and Paul's aluminum manifolds plus two rotary
engines. Call 805-551-0983 <tel:805-551-0983 <tel:805-551-0983
<tel:805-551-0983 keith@castle-light.com
<mailto:keith@castle-light.com <mailto:keith@castle-light.com
<mailto:keith@castle-light.com Regards, Keith Moore



Thank you every one for the quick replies. I'm looking for a mid
March start with the firewall forward, but like to plan ahead and
looking to buy now. I have the engine already taken apart and ready
to assembly once I get the rotor housings p-ported. Waiting for reply
from Jeff D to accept the work. Same with the PSRU / adapter plate
listed on the website. Anyone else looking?

The prop will be wood with carbon fiber or complete carbon fiber, so
the RD2-C version will work. I don't know too much about Tracy's ECM
and the different versions out there. I'll have GRT's EIS to monitor
the engine, so just looking for the controller. I would like to play
around with the Maximite this summer, but would like a running ECM
first.

I have Keith's contact. If the others would like to send me an email
  with theirs. Â mattboiteau_at_gmail_dot_com Or reply to the
thread, either way works for me.


- Matt Boiteau

If you can hold off I am shooting at getting a maximite demo system
ready for sun n fun. I have all the parts. The stacked fans device
will simulate the air flow for the mass air flow sensor.

Paul Lamar

Matt Boiteau

Do you have your GRT EIS yet ?

http://www.grtavionics.com/

John Gibbons



John, no I haven't bought the EIS yet. I'll be going with GRT HXr for
my glass setup.

- Matt

Matt,

  I can't speak to their HXr products as my only experience is with their
EIS. A friend bought a partially built GlaStar that came with a GRT EIS. As
he changed the engine he needed to upgrade which he did. and we are now
within a week of first flight. I was not involved with the installation but
as I am conducting the flight test program it has fallen to me to program
the EIS. I acknowledge that the EIS is an older generation technology and
they have moved on to newer interfaces etc but they do still sell the EIS
that we have. As such I would expect good product support. The manual
provided for the system is probably the poorest manual I have ever worked
with.


There are references to illustrations that do not exist, explanations
of features can be very confusing and the order of instructions for set-up
does not match the order that the unit itself uses. GRT does answer emails
but are not effusive with details, and when I did talk to a tech on the
phone and stated that I thought the manual was the worst I had seen, the
response was like a verbal shrug of the shoulders. I asked a few questions,
the answers to which helped clear up some of the issues but the basic
response was " just work through the steps in the manual and you'll figure
it out". Certainly it gave me the impression that this was the forgottten
bastard child of their product line, but they are not cheap products, they
still sell them, they have had years to improve the experience and they have
to know there can be a long lead time from purchase to initial use on these
products.
  Perhaps they have upped their game with the HXr line.

Cheers
John  Gibbons



The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.