Subject: Fwd: Re: Forum & transmission question
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 1/22/2015, 4:33 PM
To: AA-1-Me



   Paul,
   Just a couple questions - first, does the forum have an archive. And I know
   this has came up before, a transmission to combine two rotary engines
   driving one prop, or two counter rotating props.

   Regards,
   Norman Parmley

   No it does not. The popular questions are answered on the web site.

   If it had an archive it would be over 500 gig. The newsletter is going on
   16 years with  many dozen builders. Mazda rotaries have been used
   in aircraft starting in 1973.

   Paul Lamar

   Wankel Gmbh built such an animal. One prop.

   Paul Lamar

Interesting, I see they have used the plugs up configuration, which makes sense.
But I don't see any clutch system to address a single engine failure. maybe there
is a shear pin system to address this.

Phill Hinds
George Town TAS

For the charge cooled Wankel rotary it does not matter where the plug is pointing.

For the Mazda rotary it is not a good idea to use plugs up. For rotor cooling gravity
is used to return the hot oil to the sump. The temperature of the rotor controls
the life of the apex seals and the amount of HP AKA volumetric efficiency of the engine..

Any experienced Mazda rotary racer will tell you the cooler the oil the more the HP.
The rotor is the main driver on the temperature of the oil. One third
of the rotary cooling  is done by the oil.


Another negativer factor is the extra  length of the oil pump suction pipe required.

Paul Lamar



   The Rotary Engine News Letter. Powered by Linux.
   ACRE NL web site. http://www.rotaryeng.net
   You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2015 All world wide rights reserved.