Anyone have RSW RD2-C for sale out there And his ECM aswell

-Matt Boiteau


Paul, Has anyone explored converting early RWS redrives to the C
version So one could use a standard propeller...

Chris Cosman


I am sure it can be done.



Hi Paul I am almost done with the reduction gear, still have to
machine the splines on both side shaft.




JEAN PRUDHOMME


Looking good Jean. If you get together with Randy Kemp in Colorado
the two of you could go into production.

Paul Lamar

That is a built in permanent magnet alternator and capacitor
discharge ignition system combined. Commonly used in marine outboard
motors and motorcycles.

That means the engine will continue to run if the conventional
electrical system fails. No battery is really needed.

Paul Lamar

To: JEAN PRUDHOMME

Jean,

Are you using cnc equipment for your manufacturing

If not, I would be interested in helping manufacture the PSRU or
other items.

Where are you located

My email: n a a 7 3 x at y a h o o .

Randy Cimarron Mfg. 113A Mill St. Silver Cliff CO 81252




Hi Randy
it will take certain time to complete the PSRU and then I do have to redesign with all changes I am making plus a bell housing redesign which it will be shorter and lighter.
These time I am very busy with the snowbird who purchasing property in So Florida and by the spring I will put more time on it.
I do live in Pompano Beach Fl


JEAN PRUDHOMME



The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http:www.rotaryeng.net You Tube http:tinyurl.combeqqxas Copyright
1998-2015 All world wide rights reserved.