Subject: Regarding A hybrid mix up
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 1/26/2015, 11:58 AM
To: AA-1-Me <rotaryeng@earthlink.net>, AA-1-Me <rotaryeng@earthlink.net>, AA-1-Me <rotaryeng@earthlink.net>


Formula One is supposed to be about automotive innovation. If it
becomes a spec class I'll stop watching it.

Energy recovery is a good idea. 50% of the fuel energy now goes out
the exhaust in the form of waist heat and kinetic energy in all
production cars.

It is a good idea to recover some of this.

Noise is HP. HP cost fuel. Get used to it.

BTW The current narrow rear wing is dumb. With the same area a full
car width wing would have half the wing drag with the same down
force.


Some people lament the lack of noise with the 2014 Formula One race
car.

Noise is the sound of waisted fuel going out the exhaust pipe.

Paul Lamar

http://www.rotaryeng.net/who.html

   Hi!: I heard about someone installing a copper tube coil around the exhaust
    of engine, to heat the passenger's part in a motor home, also some used a
   similar approach to move an Steam or Stirling cycle machine to save the power
   lost in exhaust, Stirling cycle machines being more efficacious when the ambient
   temperature is cold, you can see examples of Wankel-shaped, Stirling engines in
    YouTube, and a review article about advances in rotaries, in SAE Journal,
    February 1978, indicates that at 3'000 rpm, motoring a Two Rotor Mazda takes
    just 55% of the power needed by a similar reciprocating engine, losses to cooling
    medium are perhaps lower in rotaries, specially in air-cooled engines that work at
    an slightly  higher temperature than liquid-cooled engines, but RCEs loss heat in the exhaust,
   and part load efficiency is not very good. In the same article Toyota indicated more
    than one liter of gasoline/100km better economy in town with their RCE versus a
   common reciprocating engine of their own line.
       Will an approach of Peripheral Port intake, Side Exhaust Porting, or Mixed Peripheral
   and Side Intake Porting with Side Exhaust ports give even better results?
    Is the YouTube video: 'Rotary Engine Breakthrough', real or a fantasy?
    I don't know, and I don't have the means to test the concepts, also the recent intentions
   of Mazda regarding rotaries seem not being quite positive. Let's see.
      Thanks for your attention. Best regards. Salut †
       Jose Gros-Aymerich
     Madrid, Spain


The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.