covers

Randy, This is what the ignition control computer covers look like.
It will be a few weeks before I am ready to order a batch. I made
enough on my cheap Chinese mill to fill my immediate needs.

BTW I had to over haul the spindle. I was getting a lot of chatter.
Fortunately it had tapered roller bearings. If it had been a Bridge
Port it would of cost me $2000 for matched dual ball bearings top
and bottom :) I only paid about $600 for the CCM about 45 years ago
:)

There were hair line cracks in the outer race. I did not want to
just tighten it up as the bearing would totally fail soon for sure.

Paul Lamar

Paul,
maybe the Bridge Port bearings cost more, but they dont fail like the
chinese ones do.
My Bridge Port is a 2hp 1954 model, still going strong. I had the same
situation
with my Cat D4 bulldozer in that the Cat bearings had 13 rollers instead
of the
normal 11 rollers found in 'other' bearings. Lets not confuse quality
with price
Cheers,
Russ Ward

I have no idea what you are on about or what you think my point was :)

The bearing that failed was a Timken made in the USA.

My hangar neighbour had his Bridge Port fail. In fact there is a company
that specializes in over hauling Bridge Port spindles. No doubt they are
using foreign bearings.

It all depends on how the mill is used.

All most everything is made in China now. Even well known US brands.
Most of your car is made in China. Having said all that there is no
doubt most
Chinese goods are junk. But they are slowly getting better.

The replacement Timken bearing I bought for my mill  was made in Poland.
I assumed I was buying a US made bearing.

If our so called commie president would pull his head out of his ass and tax
Chincom  goods we would have more jobs here. The people over there
are working for nothing due to the commie chin gov fixing the monetary
exchange rate.

Paul Lamar


Roger that Paul.

I overhauled my Bridgeport a few years ago and it did cost $2000.

I bought Tracy Crooks Rotary book, and learned a lot.  Can you direct me to other books I should be reading about putting a mazda in my Tailwind?

Does your PSRU have a thrust bearing?

Randy  Kemp


Yes several. Since it uses helical gears the sun gear tries to separate
from the planet gears.

Do you have my book How to Cool Your Wankel.?

30 bucks  cash plus $5 for shipping.

830 e santa maria st
suite 303
santa paula
ca
93060

Paul Lamar

The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net <http://www.rotaryeng.net/>You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.