Thanks for the input guys.
Your comments have been taken on board. This is the first aircraft that
I have built; it is a pioneer 300 microlight or to be precise a champion
V by Giuseppe Vidor, scratch built. We are limited in the microlight
class in New Zealand to 600kg or 1320lbs all up takeoff weight. I am
building a single rotor 13b power plant, and using the Racing Beat side
plates, the turbo and fuel injection on a side port seems the best way
to go.
Andrew Campbell
How much horsepower do you expect from the single rotor, FI, turbo
combination?
Joe Spelz
150 HP would be easy.
The neat think about it is the turbo can be bolted directly to the
rotor housing.
Paul Lamar
Andrew, do you have any weights of the whole package. Were you able to
buy a eccentric shaft, or did you re-machine a 2 rotor one ?
Thanks, Steve Carlisle
Single rotors have been built here so I was able to have a new shaft
machined. I don’t have a final weight yet but we are hoping it will come
out to be around 125 lbs with the ali side plates. We have the option of
using a lightened ring gear, I will be using a belt reduction.
Andrew.Campbell
Make sure you put an outboard bearing on the e-shaft to take the side
load from the belt.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.