Paul, What is the max torque that the RX8 puts out? Just have to test
   my rubber coupling to see if I can destroy it. Neil.


   P-port average 200 foot pounds but it is a pulse. Peak near 400 foot pounds
   with a valley near zero. There is a heat issue so if your using rubber
   use silicone rubber. Higher on a turbo depending on peak power.

   Send me a sketch or dwg of what you have in mind.

   I have some steel parts in stock for this rubber coupling.

   BTW Randy, I can send you a complete set of these un welded steel parts.
   You might want to do the billet version.

   This is based on months and months of work after Tracy's torque isolator
   experienced
   stock Mazda flex plate cracking with the higher power versions of the
   rotary.

   Paul Lamar

Paul, what do you charge for the whole set of parts? Will it also work on a 450 hp. 3-rotor? I am interested in building such a dampener.

Erik in Oz.

Shipping by mail to OZ cost close to $100 US.
The parts are only $50 US :)

Best to buy them there.

Paul Lamar


   The Rotary Engine News Letter. Powered by Linux.
   ACRE NL web site. http://www.rotaryeng.net
   You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2015 All world wide rights reserved.