I am Pascal from France and have the following question:

I received the data sheet of the gear reduction drive of the Ford E40D.
But there are 3 planetary systems in it:

1)      The over drive planetary

2)       The front planetary (I think this is the right one)

3)      The rear planetary.

 I intend to build my PSRU for an RX8 engine with the ration 2.85, a kind of a copy of tracy’s design who unfortunately doesn’t produce it anymore as he retired.

Then I try to solve my problem by myself.

Which one is the good one??

Thanks for your help.


Best regards

Pascal

Pascal Virlouvet Project Engineering Manager,  GMT Packaging Operations

.....................................................................................

Is kind of confusing. The very front planet set is the overdrive planet set.

They don't call it the front planet set because the second planet set was called the front planet set for years and years long before there was an over drive version :)

The front planet or middle planet set is the one to use for 2.85.

So far nobody has used the over drive planet to my knowledge.

The rear planet is used for 3.12 and it is the strongest.

Now we can add France to the list of many countries making gear boxes for the Mazda rotary engines used  in air planes :)

BTW I might add Tracy's was not the best design.

Paul Lamar


Thanks Paul

I got the details of a FORD E40D gear box and completely understand what you mean by the front being the overdrive and the front installed in the middle

Question: the 6 pinions one (middle or front) is capable of which max power (I need 200 HP ). The rear one, strongest would surely absorb a 300 HP BUT 3.12 ratio is too low.

I will design a gear box "copying" mistral one by doubling the bearings (rolls and balls) to support axial and longitudinal loads

I need to wait to receive my E40D to make measurement to draw around the box (except if you already have those dimensions)
And yes you can add France :)

Best regards
Pascal


The max power is a function of how cool you keep the gear box  oil.
Max torque and torque fluctuations are important parameters.
Rubber couplings mitigate the shock of the torque fluctuations
on the gear contact lines and damp some resonance problems.

The 3.12 is not too low if you want to get the most power from a stock Mazda
RX8 engine. The stock RX8 red line is 9000 RPM and the most RPM you will see
with a 2.85 and a 70 inch prop is 6500 to 7000. The prop tips are transonic
at that RPM. Intake manifold runner  length is critical for what ever max
RPM you choose..

Paul Lamar



The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.