Subject: How to convert a CC air wrench to a simple air motor
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 2/15/2015, 1:40 PM
To: AA-1-Me

Throw away part D and E.

Turn down or grind down part F diameter to the same
diameter as part G as shown by the red arrows.

Weld Part F to part G.

Reassemble and you are done.

You now have an air starter or reversible air motor.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.