I have been really really busy with my MFS server. It has finally
gotten FCC approval so I can start selling it. Just configured it for
my accounting system. Now it backs up automatically, and instantly,
around the clock when the computer is connected to the network. There
it gets backup daily so there is no more fear of loosing accounting
data to hard disk failures. And the same is true for all the
important digital pictures and data.

I am back, state side, for Chinese New Year as China is basically
shutdown for the coming weeks.

In the last few months, we made new RF technology for IOT(Internet
of Things), it is a two way packet radio, low power, Frequency
Hopping Spread Spectrum to work on un-licensed 2.4GHz band. Very low
power and I am contemplating if there is any use of this technology
in an aircraft as the power is so low that it can work off 3V button
cells for months at a time. Standby current is in uA. Will be great
for door locks.

Our partner has developed the entire protocol stack from mobile APP
to cloud server. I did the hardware and the radio, plus asyn
interface to a controlled device.

I think 2015 will be an exciting year for me. I may still do a
robust, distributed, self healing, Engine Controller Unit for a
rotary engine, but unlikely to happen until end of 2015 or 2016 when
I can have more spare time. The design should be base on telephony
stuff such that there is a spare of every component, always active
and standby to take over when one system fails.

Hope to see you before I leave for China again.

regards,

Henry

I am leaving for Europe about Friday to attend EBW and demo my
ignition system.

Paul Lamar



If you are back before end of Feb. I could drive up and say Hello. I am
leaving for Taiwan on 3rd.

Henry Nee

I won't be back until about March 7th Henry.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.