Subject: How to Cool Your Wankel book.
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 2/19/2015, 11:03 AM
To: AA-1-Me



Randy,

Your book is on the way.

BTW did anybody read the March Kitplanes article Meredith Effect Fact or Fiction?

Kitplanes is doing a ten times better job than EAA Sport Aviation mag.

Can anybody that has my book tell me the key facts the author is missing ? :)

Paul Lamar


      I read the article... but I have not bought your book yet
   ATP Bill

      What did you think of the article? Did it answer all of your questions ( if any) :)

      Paul Lamar


No it did not answer all my questions. ..I was somewhat disappointed in the article. ..
.looking for more science to use in making decisions

ATP Bill

You will get it in my book Bill :)

Paul Lamar

Paul
I didn't know you had (have) a book for sale as guidelines for Rotary installation.
May you give me detail, then I purchase.
I already bought Tracy's book, good things in but a bit messy.....

Thanks.
BR
Pascal in Paris

My book focuses on the cooling problem.
Most people that installed a rotary prior to the book failed to have it cool properly for many reasons. Mostly because it is not as simple as it looks. A car type cooling system would result in far too much aerodynamic drag and is a throw back to WW I liquid cooled aircraft engine technology. Therefore people tended to underestimate the rotary cooling requirements

Many people gave up on the rotary for that reason.
After WW II some serious work was done on heat exchangers and diffusers.
I incorporated that R&D into the book.

I am taking a bunch with me to Europe and they will be available either at AIXRO or Wankel AG or both.

Neal Ungar sells them in Australia.

Neil Unger <neil.unger@bigpond.com>


Paul Lamar



Paul

I am at 800 km from Nurnberg..... in France.

I am very AWARE of the cooling of a rotary.... High power in a small package, then more energy to 'expulse": mechanical + heat...

In his book, Tracy recommends to use Air Conditioner exchanger....claiming the air flow is always perpendicular in the radiator whatever the primarily air flow angle is....

I would love to purchase, then, do you mean I need to contact Neil in Australia???

Thank you

Best regards

pascal

Only 500 miles.  Nice  afternoon drive in California  at  80 MPH. I once made Rome to Frankfurt in one day with an Opel rental car flat out at 100 MPH or so :)

I am sure they can ship.

Poul Henrik Woelfle AIXRO <ph.woelfle@woelfle-engineering.com>
I think Poul is only 500 Km away near Cologne.

Tracy was so wrong about that AC core :)

I had to fly to Florida and help him with his cooling in 2002.

Paul Lamar


Hey Paul,

maybe you forgot that you left me a couple of copies of the book.
@ Pascal (and everyone else): €30 by PayPal to howcool@wengine.com incl. shipping.
You're certainly also welcome to visit anyway.

Poul Woelfle


Thanks Poul.

I'll be there next week. Are you ready to test the ignition?
I'll need a small 12V battery and a small soldering iron.

I'll bring some more books with me.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.