Hi Paul
Hope all is well ?
Was looking at building my P-port 13B with Holley carb find attached information it will be for street use and not aircraft. Will the same apply fitting of Holley 500 cfm 2 barrel(straight bolt on no adjustments needed) ? Then do you have any information what the size of the runners should be maybe drawing what material to use etc. ?
Then second picture will be of P-port intake manifold for street use but I have no information on it dimensions etc.
Let me know ?
 http://www.rotaryeng.net/HOW-TO-INSTALL-HOLLEY.html


Thanks
Cheers
Barend. De Beer

I think this was skipped. Sorry. The extension was reversed
on the attached link.

The runners in the 3D's are 2 inch OD 1/16th wall aluminum.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.