Subject: PSRU clarification flange and shaft.
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 3/5/2015, 1:28 AM
To: AA-1-Me




    Hi Paul,

    I have been  reading dozens of emails about the PSRU gearbox and
    looked at the your attachments.

    Unfortunately I having been reading these emails, I am getting
    slightly confused so I would like to start a short thread to clear
    the confusion.

    Would I be correct in assuming the PSRU being built by some guys on
    this mailing list is derived from  ORG_ROSS_DWG2.jpg drawing

    There are altogether 16  components in that  drawing. Would I be
    correct in assuming that some of the parts are available and one can
    get them if they know the manufacturers part numbers If my

    assumption is correct what are the manufacturer part numbers
    corresponding to the 16 components

    Are they also modifications to the original drawing there fore new
    components are involved

    Thank you Zahid Rahman

    Yes the entire planetary gear set is available from transmission
    repair part wholesalers in the US. One is in southern California
    called Slauson Transmissions Parts. Cost about $200 US.

    http://www.slauson.com/  One must own a company to buy from them.

    Slauson has their own parts numbers. Here is a  catalogue sheet.

    Yes there are quite a few suggested modifications.

    Here are some.

    It is cheaper and quicker to make the housing out of thick wall
    aluminium tube.

    Paul Lamar in Germany



    Paul What is the material used to machine flange and propeller shaft
    6061 T6 4130 steel

    Br Pascal

    4130 Steel heat treated.

    Paul Lamar


    Hi Paul

    I have managed to order the parts from slausons. While waiting for them to arrive I thought I have a ago at the flange and propeller shaft.
    I have seen a number of websites which offer cnc services.
    For example http://www.emachineshop.com/machine-shop/CNC-Milling-Service/page78.html

    They require CAD drawings of the part you need them to make.
    Do you have such a drawing for flange and propeller shaft.

    Best Regards
    Zahid  Rahman


All I have on the SAE flange is this. No cad dwgs. I recommend getting Rhino for CAD dwgs.


Paul Lamar in Mcdonalds at FrankFurt. Best email in the world.

    The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
    http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
    Copyright 1998-2015 All world wide rights reserved.