Hi Paul,
I have been reading dozens of emails about the PSRU gearbox and
looked at the your attachments.
Unfortunately I having been reading these emails, I am getting
slightly confused so I would like to start a short thread to clear
the confusion.
Would I be correct in assuming the PSRU being built by some guys on
this mailing list is derived from ORG_ROSS_DWG2.jpg drawing
There are altogether 16 components in that drawing. Would I be
correct in assuming that some of the parts are available and one can
get them if they know the manufacturers part numbers If my
assumption is correct what are the manufacturer part numbers
corresponding to the 16 components
Are they also modifications to the original drawing there fore new
components are involved
Thank you Zahid Rahman
Yes the entire planetary gear set is available from transmission
repair part wholesalers in the US. One is in southern California
called Slauson Transmissions Parts. Cost about $200 US.
http://www.slauson.com/ One must own a company to buy from them.
Slauson has their own parts numbers. Here is a catalogue sheet.
Yes there are quite a few suggested modifications.
Here are some.
It is cheaper and quicker to make the housing out of thick wall
aluminium tube.
Paul Lamar in Germany
Paul What is the material used to machine flange and propeller shaft
6061 T6 4130 steel
Br Pascal
4130 Steel heat treated.
Paul Lamar
Hi Paul
I have managed to order the parts from slausons. While waiting
for them to arrive I thought I have a ago at the flange and propeller shaft.
I have seen a number of websites which offer cnc services.
For example
http://www.emachineshop.com/machine-shop/CNC-Milling-Service/page78.html
They require CAD drawings of the part you need them to make.
Do you have such a drawing for flange and propeller shaft.
Best Regards
Zahid Rahman
All I have on the SAE flange is this. No cad dwgs. I recommend getting
Rhino for CAD dwgs.
Paul Lamar in Mcdonalds at FrankFurt. Best email in the world.
Strange
I found SAE 1 - 2 - 3 of different dimensions on the web when I type
"Lycoming flange". Overall flange diam is smaller and they give 5 inches
SAE 2
If someone (Rhino?) has the dwg, should be happy to get them
Thanks.
BR
pascal
Here are a few more. I have never cross checked them.
Paul Lamar in Mcdonalds at FrankFurt. Best email in the world.
The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.