I was trying to buy bearings for the ROSS PSRU. Although I  sent
all the attachments you gave
     I was asked couple of questions which You may have better answers.
   I appended copies of emails I received below from Brian.

   Regards
   Zahid Raham


   It is up to you to make a detail drawings of the gear box with all
dimensions.
   I suggest using Rhino. There is a problem with lawyers called
product liability.

   I am just making suggestions. If you send me a final Rhino drawing
of the gear box
   you want to build I may be able to spot problem area's. You are
making those decisions.

   Paul Lamar


   Is there anybody on this list who is selling the machined parts to
make the Ross Psru.
   Zahid Raham




I hope to sell the machined parts for the Ross PSRU.

I am probably months away from starting on the PSRU parts though.

Just made the first machined engine mount adapter plates. (Matt, will have info for you soon)

More to come soon.

Randy   "T H A T   E V E R Y   M A N   B E   A R M E D"
Cimarron Mfg. <http://cimmfg.us/>      Freeze Dried Food <http://preparation.thrivelife.com/>      Corrosion Control <http://rustbloc.com/>
OnMarkArms <http://onmarkarms.com/>        Discount Guns <http://www.davidsonsinc.com/consumers/subsites/dealer_home.asp?dealer_id=890577> RifleSmith <http://riflesmith.us/>     III <http://sipseystreetirregulars.blogspot.com/2010/02/yeah-but-what-does-that-three-percent.html>
113A Mill St.          Silver Cliff     CO           81252

Great Randy, Thanks for all you work.

Paul Lamar


   The Rotary Engine News Letter. Powered by Linux.
   ACRE NL web site. http://www.rotaryeng.net <http://www.rotaryeng.net/>
   You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2015 All world wide rights reserved.