Subject: ford gears be changed over to the 3.12
From: paul
Date: 3/14/2015, 5:27 PM
To: AAA-rotaryengine




Paul
I have a question on the Tracy Crook 2.85 reduction gear. Can the ford gears be changed over to the 3.12 ford gears can use the same housings ?

Regards
Keith A. Clayton


Yes in theory but it may not be easy.

I have never done it.

If you disassemble it and make some measurements of the inside
of the housing I may be able to figure it out.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.