Anyone on the list flying a rotary and willing to participate in this
contact me at cmcosman@icloud.com <mailto:cmcosman@icloud.com>  Include pertinent things like
make, model, FI or carb, redrive ratio, electronic ignition or stock,
firewall forward weight if known, flight hours of course, year of
your Mazda motor, 1 or 2 rotors. Other fun facts might be the volume
of your radiator, fuel burn @ ___ airspeed, a picture of the plane
and another of the install...  or anything else you feel; I'm just
the compiler.


RV-4  1993 13 BREW  normally aspirated, Real World solutions ECU and ECM, Redrive 2.85/1, LS 1 coils, C&R aluminium radiatior, 12x24x2 inches, stock oil cooler, 8~9 gpm @ 130 kts- still need to do some drag clean up on the plane, especially near the muffler and cooling scoop exit. Prop is a 72X 88 three blade. Fuel injection uses my own manifold, stock injectors and Real world solutions controller.

Brian Trubee-



The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.