I made a few changes here and there to up the energy.
Based on the current consumption of .25 amps it is
about double assuming the overall efficiency is roughly the same.
The spark gap is now up to .2 inches.
This is 5 sparks at 8000 RPM. It is quite noisy and noise is energy.
Those of us that have heard rotaries run know that all too well as
well as the
current Formula One crowd.
More to come as we are only using 9600 turns on the HV coil.
I will try going up to 12,000 turns with better coupling.
Needless to say I am very pleased.
Paul Lamar
Would it be difficult to incorporate ignition retard while the starter
is engaged?
Dale Davies
Yes. That is possible. The ignition is computer controlled. Even when
using a carb.
I supply the computer. Very easy to program in compiled BASIC.
It can take signals from two VR sensors or Hall Effect sensor or Optical
sensors or manifold
pressure or temperature sensors. It can control 4 coils either, off the
shelf coil-on-
plug like RX8 or LS1 coils or Lamar Instruments Inc high speed coils.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.