Subject: Further progress on the rotary multi spark ignition
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 3/18/2015, 11:34 AM
To: AA-1-Me



I made a few changes here and there to up the energy. Based on the
current consumption of .25 amps it is about double assuming the
overall efficiency is roughly the same.

The spark gap is now up to .2 inches. This is 5 sparks at 8000 RPM.
It is quite noisy and noise is energy. Those of us that have heard
rotaries run know that all too well  as well as the current Formula
One crowd.

More to come as we are only using 9600 turns on the HV coil. I will
try  going  up to 12,000 turns with better coupling.

Needless to say I am very pleased.

Paul Lamar


Paul, what benefits over the traditional Mazda RX8 or GM LS2's
coils?

I blew my Colormax by sending 12volts into an input pin by screwing
up the legs on a transistor (PNP vs NPN), so it's gone back for
repairs and haven't been able to program for a few weeks. I think I'm
going to switch to the newer MKII
(http://micromite.org/shop/44-pin-micromite/44-pin-micromite-module/)
to run the engine stuff, and use the colormax to run the TFT LCD
display. The colormax will also run bluetooth to my andriod tablet
for better display and user interface experience. I'm about to order
the MKII from this UK business, if you want one to save on shipping,
I can add another one and give it to you at SunnFun, or ship it to
you once it arrives.

Thinking about the engine part, these are the I/O that I can think
of. Going to take a 44pin master and 28pin slave MKII to work
together for enough I/O's.

Coil 1 Leading - Digital out Coil 1 Trailing - Digital out Coil 2
Leading - Digital out Coil 2 Trailing - Digital out

Injector 1 Primary - Digital out Injector 1 Secondary - Digital out
Injector 2 Primary - Digital out Injector 2 Secondary - Digital out

Air Temp Intake - Analog in AIr Temp cowling - Analog in   *optional
Coolant Temp Outlet - Analog in Coolant Temp Inlet - Analog in
*optional Oil Temp Outlet - Analog in Oil Temp Inlet - Analog in
*optional

Coolant pressure - Analog in Oil pressure - Analog in Fuel pressure -
Analog in

MAP sensor 1 - Analog in MAP sensor 2 - Analog in Mixture Control
knob - Analog in MAF sensor - Analog in 02 sensor - Analog in Crank
Sensor - Count

Engine Mode A/B - Interrupt Cold start - Interrupt Disable coils 1 -
Interrupt Disable coils 2 - Interrupt Disable injectors Primary -
Interrupt Disable injectors Secondary - Interrupt

Alternator regulator - PWM    *still researching how to control the
RX8 alternator internal regulator

-Matt

Hopefully slightly lower fuel burn and slightly more power..
Hopefully better able to fire very lean mixtures.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.