Subject: ford gears be changed over to the 3.12
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 3/18/2015, 11:10 AM
To: AA-1-Me


Paul I have a question on the Tracy Crook 2.85 reduction gear. Can
the ford gears be changed over to the 3.12 ford gears can use the
same housings ?

Regards Keith A. Clayton


Yes in theory but it may not be easy.

I have never done it.

If you disassemble it and make some measurements of the inside of
the housing I may be able to figure it out.

Paul Lamar

Paul

Do you have the transmission and part numbers for the 3.12 planetary
gear set. I've been trying to follow up on it with ford and
transmission suppliers and they look at me strangely.

Regards Keith A. Clayton

Where are you? If you are some place other than the states you may have problems.
This transmission was used in large US cars and powerful US style pick up trucks.

If your in the states.
Just tell them you want the six pinion  rear planet set.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.