Subject: Further progress on the rotary multi spark ignition
From: paul
Date: 3/19/2015, 2:03 AM
To: AAA-rotaryengine


I made a few changes here and there to up the energy.
Based on the current consumption of .25 amps it is
about double assuming the overall efficiency is roughly the same.

The spark gap is now up to .2 inches.
This is 5 sparks at 8000 RPM. It is quite noisy and noise is energy.
Those of us that have heard rotaries run know that all too well as well as the
current Formula One crowd.

More to come as we are only using 9600 turns on the HV coil.
I will  try  going  up to 12,000 turns with better coupling.

Needless to say I am very pleased.

Paul Lamar


Would it be difficult to incorporate ignition retard while the starter is engaged?

Dale Davies


Yes. That is possible. The ignition is computer controlled. Even when using a carb.
I supply the computer. Very easy to program in compiled BASIC.

It can take signals from two VR sensors or Hall Effect sensor or Optical sensors or manifold pressure or temperature sensors. It can control 4 coils either, off the shelf coil-on- plug like RX8 or LS1 coils or Lamar Instruments  Inc high speed coils.


Paul Lamar

Paul
What is the price for your ignition system and do we need to install 2 on parallel for redundancy?

Pascal Virlouvet

It will be a couple of hundred dollars. I don't know exactly.
2 will work with the 85 distributor.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.