Hi Paul,
Having read your website,
There are a number of WHATIF flies buzzing around my head if you
would be
kind enough to swat them for me for a good night sleep.
1. "It takes HP to suck the combustion air into the engine" .
Does that mean you simply allow more air to go to the combustion
chamber
with no MORE EXTRA in FUEL resulting in greater output HP ?
1a) By Output Horsepower my understand is the flywheel will achieve
1000rpm
in less time and the flywheel will overcome friction/resistance
using same
amount of fuel.
2. If my above assumption of more air no extra fuel is correct then
an ECU
like Megasquirt simply continues to squirt (using direct injection)
same
amount of fuel into the combustion chamber and firing the spark at the
appropriate time ?
3. To harness the extra Horse Power and rev up the engine you suggested
using the new side throttle system with p-port. Does that mean the
using
VERNIER CONTROL Is that the new throttle cable. But I am wondering
there
must be some sensor which tells the ECU as you pull the cable to
allow more
air fuel into the combustion before the usual sparking ?
4. As far the Megasquirt is concerned should it continue to behave same
usual
even if the engine wasn't p-ported with reference to amount of fuel to
squirt and then spark.
5. If my aircraft has an all in weight of 450kg including engine,pilot,
wallet . I have fuel tank of say 80 litres. I want the fuel to last as
long as possible which engine should I use 13b , 13b P-port, 13b
Turbo ,
16b , 16b P-port , 16b Turbo , 13b Turbo Compound or another option ?
Regards
Zahid Rahman
1. The fuel air ratio must be maintained. It all has to do with BSFC.
Brake Specific Fuel Consumption.
This is the weight of fuel burned per HP out of the engine. Google
BSFC.
1a. Yes the engine will accelerate faster but HP is not the only
factor.
Rotating inertia is a major factor.
2. Mega Squirt maintains the correct fuel air ratio.
3. A slide throttle reduces in internal aerodynamic drag of the intake
system.
4. Same answer as 2. The sensor is either a mass airflow sensor or
simply the intake manifold
pressure and air temperature.
5. For best BSFC use a turbo compound RX8 engine. Soon to be available
from Mazda.
May not be P-port so a lower BFSC would be possible with a turbo
compound P-port.
Paul Lamar
When is it appropriate to use reduction ratios 2.85 and when should
one use 3.17.
The reverse rotation also available with Ford of 2.17:1 and 1.85:1
, is it used with piston engines because they turn in the opposite
direction to the rotary.
Zahid Rahman
HP is RPM times torque.
Most aircraft piston engines turn in the same direction as the rotary.
Are you a pilot?
Paul Lamar
Not yet. I going to build my own light aircraft as a hobby. I
asked the
question because I thought
it said on your website the rotary engine turn in opposite
direction and
uses 2.17 reduction ratio.
Zahid Rahman
The Mazda engine rotates the same direction as most AC engines rotate.
Paul Lamar
Hi Zahid,
I am building an LSA aircraft, I am using a single rotor 13b
sideported,
you will probably want to use the alloy side plates from Racing
Beat in the
US. The alloy plates will save a considerable amount of weight. At
450Kgs
if you are a two seat aircraft you will want to be fairly weight
conscious.
If you use a single rotor, side porting would seem the way to go.
You will
have to find someone to machine the e shaft as they are not
available off
the shelf. You should have no difficulty in producing 120Hp The
less Hp you
require the less fuel you will burn. Large savings in fuel burn can be
achieved by building the right plane for your needs. In the LSA
Field there
are some very efficient aircraft around.
Andrew. CampBell
A side port single rotor is definitely not the way to go.
Paul Lamar
Zahid Rahman
I am definitely going to build 450 kg weight limit two seat aircraft.
I don't know if Single Rotor side port is the way to go or not.
however you can get the e-shaft off the shelf.
http://atkinsrotary.com/store/One-Rotor-Eccentric-Shaft.html
<http://atkinsrotary.com/store/One-Rotor-Eccentric-Shaft.html>
http://atkinsrotary.com/store/One-Rotor-Rotating-Assembly-
<http://atkinsrotary.com/store/One-Rotor-Rotating-Assembly->
Shaft-Rotor-Counterweights-Balancing-Service.html
Zahid Rahman
Single rotor P port IS the way to go :-)
Richard Sohn <
res12@fairpoint.net <mailto:res12@fairpoint.net>>
Sixteen years ago Dave Atkins wife told me I was not to mention
their name
:-)
I would send this to them but their email address is not on their
web site
:-)
Paul Lamar
Hi Richard
Have you sorted out all the teething problems.
How close is your fuel consumption to 10-13 litres per hour.
The one problem with Atkins e-shaft is that it is nearly same price
as a
brand new Aluminium engine with same HP
Zahid Rahman
Fuel consumption is directly related to HP.
What HP are you talking about?
Full power? 70% of full power? What?
Paul
The mistake I am trying avoid in choosing the best engine for 450 kg
weight limit two seat aircraft is this.
The Mercedes ML 270 has worse fuel economy than the ML 320 because the
2.7 engine is under powered for the weight of car.
Zahid Rahman
That is a ridiculous comparisons. There are probably 100 or more
uncontrolled variables in that comparison.
Speed acceleration, weight, rolling drag, aero drag, to name just a few.
What stupid car magazine printed that?
Full power? 70% of full power? What?
Full power? 70% of full power? What?
Full power? 70% of full power? What?
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.