Subject: Rebuild 20B to NA PP
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 4/11/2015, 10:10 AM
To: AA-1-Me



Dear Paul,

I would like to rebuild 20B to NA PP but have few queries not sure. Hopefully you can answer my few queries below.
Picture 1: How to close up the 2hole mentioned in picture 1.
Picture 2: What is the material for the hole in picture 2. Where i can get these material.
Picture 3: What is the size of the hole?

Thank You,

Best Regards
Vins

Randy Kempf is now set up to do this work.
http://www.rotarpower.com/

If you want to do it yourself use this dwg.

Don't use epoxy bonding. That is very problematic and prone to leak
cooling water into the combustion chamber.

TIG weld SS tubes to the steel liner.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.