Subject: Periferal intake and side exhaust ports ?
From: paul
Date: 4/28/2015, 7:39 AM
To: AAA-rotaryengine



Hi Paul,
          I am soon about to pull the RX8 motor apart to p-port it. I was
wondering if it would be worth carving out the exhaust ports a bit while I
have the engine apart.

I watched somebody doing it on utube using a template it looked relatively
easy. Where would I find the dimensions to do it ? also my friend Grant is
coming over there soon,

I'll get that planetary set to you.

                   Cheers Chris.



I think you would hardly notice a difference.

The racers look for every last HP to be had.

Paul Lamar


Hello, Paul

As far as I understand how the wangle rotary works, it seems to me that:

- The standard 12A to 13 B is Side Ported for intake and Peripheral Ported for exhaust.
- As the rotary chamber has a larger cooled metal surface than a reciprocating piston engine of same displacement, and a
larger amount of fuel is not burnt because a layer of gases is to cool to ignite.
- This layer of unburned fuel is directly down out through Peripheral Exhaust. Port and that tend to increase pollution and
fuel flow.
- A Side Exhaust Port reduces pollution and fuel flow by recirculating this layer if unburnt gases and oil.
- On the other hand, a Peripheral Intake Ports (like the ones of Renesis and Mistral engines) increase the amount of gases
sucked by the engine, and thus the power.

So, imho, the best solution for a airplane rotary engine would be:
- Peripheral Intake Ports for better power,
- Side Exhaust Ports for recirculation of the unburnt gases that would be mixed with the incoming charge through the
Peripheral Intake Ports...

Please Paul,
1/ Does that make sense?
2/ Drilling Peripheral Intake Ports into a Renesis trochoïd would make it, but as the older Mazda engine are just the
contrary (Side Ported for intake and Peripheral Ported for exhaust) has anyone ever tried to run them in the opposite
direction?
(Of course that would mean drilling new location for spark plugs and modifying the oil pump…)
Thanks



                Philippe DEJEAN


1/ Almost al true however the 1991  Le Mans winning Mazda 4 rotor engine had a BSFC of .47. That was good enough to win the race outright when competing with
the finest race car engines the worlds who's who of race car design could build.
all requiring to run a fixed quantity of fuel.

2/ Not as far as I know.

Paul Lamar




The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.