Subject: New hybrid GT Truck for Walmart?
From: paul
Date: 5/4/2015, 8:24 PM
To: AAA-rotaryengine


Gas turbine/electric and carbon fiber and looks somewhat like a
Raymond Loewy (‘Father of Streamlining’) classic locomotive design of
the 30s-to late 40’s?  Art Deco GG1S (and GG1 electric even-I rode on
GG1Ea lot as a kid) and the steam 6-4-4-6 SS1 and T1 class engines of
the Penn Railroad…..?

It's not what you may think. Walmart is getting ready to quickly
change the Big Truck industry.

https://www.youtube.com/embed/NER9X4_gtYk?feature=player_detailpage


Mark Wiese

I applaud Walmart for using their purchasing  clout in the truck
market to influence improvements in fuel efficiency.

But this is the wrong approach. Small turbines are notoriously
inefficient. A turbo compound three rotor would be much better with
half the fuel burn. Same weight and size.

On top of that there is a 20% loss in converting mechanical energy
from the turbine to electrical energy and back to mechanical energy
to move the truck. Not to mention the weight and cost of the
battery.

Better yet tilt a  turbo  compound Daimler DD15 or DD16 diesel on
it side and use that.

https://www.youtube.com/watch?v=_q_I8SYkN8w

Or build a new horizontal opposed turbo compound diesel engine.

However 90% of the HP in a truck is there to over come the rolling
resistance of tires carrying a 50,000 pound load and to climb hills.
Aero dynamic drag is down in the noise level at 55 MPH.

That makes this mostly PR bullshit :-)  It is a good advertising
idea however :-)

Paul Lamar


I heard/read somewhere in the last few days that someone is developing
an opposed piston diesel boxer engine for use in an airplane.  I don't
know if it's a clean sheet design or a make over from something
existing.  They claim it will weigh less.  I don't see how with two
crankshafts which are by far the heaviest part of any piston aircraft
engine.  It's got to be another one of those European vaporware
corporations that live off of government development money.


  Mark LaPierre

Junker's had them in the 1930's.
It was called the Jumo.
Opposed pistons have scavenging advantages as
they are two cycle engines.

You are right. They are very heavy.

The steel "fire" plate on aluminium pistons is a good idea
for the rotary.


Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Store http://www.rotarpower.com/#!
Copyright 1998-2015
All world wide rights reserved.