Subject: Time to climb project progress.
From: paul
Date: 5/29/2015, 1:22 AM
To: AAA-rotaryengine

Here are the tanks.

The one right behind the fire wall is the 21 gallon
alcohol fuel tank. The one behind that and aft of the old
instrumets panel is the ten gallon water tank
for intake water injection and spray evaporative cooling
on the water radiator and the oil cooler if necessary.
If we are lucky the oil won't overheat in a minute
and a half.  We are trying to cool a 650 HP turbo 2 rotor
here.

The water rad will be a cross counter flow 31 inches
long by 19 inches wide in the quick and simple configuration.
Cooling drag is of no consequence in a time to climb
as it is mostly a power to weight ratio situation.


The oil tank is to the right of the fuel tank
and  behind the firewall.

The pilot sits in the back seat of the Harmon Rocket.

Dan Gray is doing a wonderful job of helping
Russ MacFarland complete his air plane.

Jim Mederer of Racing Beat did the all aluminium
650 HP turbo 2 rotor.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Store http://www.rotarpower.com/#!
Copyright 1998-2015
All world wide rights reserved.