An all aluminum 20B should be about 300 pounds. P-port with turbo
should give an easy 600HP. To get a higher HP capability gear box
I would use the Allison HT 640/HT 650 series planetary with approximately
3.5:1 ratio. This transmission was designed for use in 5 ton trucks
and buses. These transmissions are readily available and so are spare
parts. Probably a lot cheaper than the helicopter PSRU. The design
would mimic the current Ross/Tracy box with dimensions changed
to accommodate the Allison part dimensions. The weight should be
close to the helicopter box and the length should be similar.

Dale Davies

The helicopter box is surprisingly light with magnesium castings
at only 45 pounds..

The drawback is; it is $30,000.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
If you want off the list PLEASE let me know and I will
remove  you.  ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2015 All world wide rights reserved.